PCI-9221

Karta 3.3/5 V PCI - 8/16 wejść analogowych 16-bitowych 250 kS/sek, 2 wyjścia analogowe 16-bitowe 1,25 kS/sek, 8 wejść i 4 wyjścia cyfrowe, 2 liczniki 32-bitowe i 2 wejścia enkodera

Features

• Supports a 32-bit 3.3 V or 5 V PCI bus
• Programmable gains for analog input: 1, 5, 10, 25
• 2-CH 16-bit simultaneous analog outputs
• Programmable function I/O, supporting modes:
  • TTL DI and TTL DO
  • General-purpose timer/counter
  • PWM outputs
  • Encoder inputs
• Auto-calibration

Specifications

• Analog Input


• Resolution: 16 bits
• Number of channels: 16 SE/ 8 DIFF
• Maximum sampling rate (single channel): 250 kS/s
• Programmable gain: 1, 5,10, 25
• Input range:  ±5 V, ±1 V, ±500 mV, ±200 mV
• Offset error: ±2.6 mV typical, before calibration, ±0.5 mV typical, after calibration
• Gain error: ±0.2% of FSR, before calibration, ±0.015% of FSR, after calibration
• -3 dB small signal bandwidth (gain=1): 1.8 MHz
• System noise (gain=1): 0.1 mVRMS
• CMRR (gain=1): 71 dB
• SFDR: (Spurious-free dynamic range, gain=1): 95 dB
• SINAD (Signal-to-noise and distortion ratio, gain=1): 85 dB
• THD (Total harmonic distortion, gain=1): -93 dB
• SNR (Signal-to-noise ratio, gain=1): 86 dB
• ENOB (gain=1): 13.5 bits
• FIFO buffer size: 1 k samples
• Trigger sources: Software, external digital
• Trigger mode: Post trigger
• External conversion source: Yes (up to 250 kS/s)
• Input coupling: DC
• Overvoltage protection: ±10 V
• Input impedance: High impedance > 1 G
• Data Transfer: Programmed I/O, Interrupt, Bus Mastering DMA


• Analog Output


• Number of channels: 2 voltage outputs
• Resolution: 16-bit
• Maximum update rate: 1.25 kS/s (static)
• FIFO: -
• Output range: ±5 V
• Output driving capacity: ±5 mA
• Slew rate: 0.014 V/ s
• Setting time (0.1% of full scale): 1396 u s
• Offset error: ±1 mV
• Gain error: ±2 mV
• Rising time: 390 us
• Falling time: 395 u s


• Function I/O


• Mode (The function I/O and encoder inputs share the same I/O pins):
  Digital I/O, General Timer/Counter, Pulse Generation
• Digital I/O: 8DI/4DO (5 V TTL level)
• General Timer/Counter:
  Two 32-bit, Base clock: 40 MHz, external to 10 MHz
• Pulse generation:
  Two PWM outputs (Modulation frequency: 0.005 Hz to 5 MHz; Duty cycle: 1%-99%)


• Encoder Input


• Number of channels: 2(2)
• Encoder type: CW/CCW encoder, x 1 AB phase encoder, x 2 AB phase encoder, x 4 AB phase encoder


• General


• PCI Bus: 5 V and 3.3 V universal PCI bus
• Auto-calibration: Yes
• I/O Connector: One 37-pin D-Sub connector
• Operation temperature: 0 to 45°C
• Storage temperature: -20 to 80°C
• Humidity: 5 to 95% non-condensing
• Power requirements: +5 V 1A typical, +12 V 100mA typical, -12 V 100mA typical
• Dimensions: 120 mm x 87 mm

Software Support

• Operating Systems


• Windows 7/Vista/XP/2000/2003 Server
• Linux


• Recommended Software


• AD-Logger
• VB.NET/VC.NET/VB/VC++/BCB/Delphi
• DAQBench


• Driver Support


• DAQPilot for Windows
• DAQPilot for LabVIEW
• DAQ-MTLB for MATLAB
• PCIS-DASK for Windows
• PCIS-DASK/X for Linux

Ordering Information

• PCI-9221 - 8/16 x AI 16-bits 250 kS/s Multi-Function DAQ Card with 2 x Encoder Input

Accessories

• Terminal Boards


• DIN-37D-01 - Terminal Board with One 37-pin D-sub Connector and DIN-Rail Mounting (cables are not included)


• Cables


• ACL-10137-1MM - 37-pin D-Sub-37(M) - D-Sub-37(M) cable 1m