DAQ-2204

Karta 3.3/5 V PCI - 32/64 wejścia analogowe 12-bitowe 3 MS/sek, 2 wyjścia analogowe 12-bitowe 1 MS/sek, 24 wejścia-wyjścia cyfrowe i 2 liczniki 16-bitowe

Features

• Supports a 32-bit 3.3 V or 5 V PCI bus
• 64-CH single-ended or 32-CH differential analog inputs
• Onboard 1 k-sample A/D FIFO
• Bipolar or unipolar analog input ranges
• Programmable gains: x1, x2, x4, x5, x8, x10, x20, x40, x50, x200
• 512-configuration channel gain queue
• Scatter-gather DMA for both analog inputs and outputs
• 2-CH 12-bit multiplying analog outputs with waveform generation
• Onboard 1 k-sample D/A FIFO
• 24-CH TTL digital input/output
• 2-CH 16-bit general-purpose timer/counter
• Analog and digital triggering
• Fully auto calibration
• Multiple cards synchronization through SSI (System Synchronization Interface) bus

Specifications

• Analog Input


• Resolution: 12 bits, no missing codes
• Number of channels: 64 single-ended or 32 differential (software selectable per channel)
• Channel gain queue size: 512
• Maximum sampling rate: 3 MS/s
• Programmable gain: 1, 2, 4, 5, 8, 10, 20, 40, 50, 200
• Bipolar input ranges: Max. : ±10 V, Min. : ±0.05V
• Unipolar input ranges: Max. : 0-10 V, Min. : 0-0.1 V
• Offset error: ±1 mV
• Gain error: ±0.03% of FSR
• Input coupling: DC
• Overvoltage protection: Power on: Continuous ±30 V, Power off: Continuous ±15 V
• Input impedance: 1 GΩ/100 pF
• CMRR (gain = 1): 90 dB
• Settling time: 1 μs to 0.1% error
• -3 dB small signal bandwidth (gain = 1): 2 MHz
• Trigger sources: Software, external digital/analog trigger, SSI bus
• Trigger modes: Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger
• FIFO buffer size: 1 k samples
• Data transfers: Polling, scatter-gather DMA


• Analog Output


• Number of channels: 2 voltage outputs
• Resolution: 12 bit
• Output ranges: 0-10 V, ±10 V, 0-AOEXTREF, ±AOEXTREF
• Maximum update rate: 1 μs
• Slew rate: 20 V/μs
• Settling time: 3 μs to ±0.5 LSB accuracy
• Offset error: ±1 mV
• Gain error: ±0.02 % of max. output
• Driving capacity: ±5 mA
• Stability: Any passive load, up to 1500 pF
• Trigger sources: Software, external digital/analog trigger, SSI bus
• Trigger modes: Post-trigger, delay-trigger, and repeated trigger
• FIFO buffer size: 1 k samples
• Data transfers: Programmed I/O, scatter-gather DMA


• Digital I/O


• Number of channels: 24-CH 8255 programmable input/output
• Compatibility: 5 V/TTL
• Data transfers: Programmed I/O


• General Purpose Timer/Counter


• Number of channels: 2
• Resolution: 16 bit
• Base clock available: 40 MHz, external clock up to 10 MHz


• Auto Calibration


• Onboard reference: +5 V
• Temperature drift: ±2 ppm/˚C
• Stability: ±6 ppm/1000 Hrs


• General Specifications


• Dimensions: 175 mm x 107 mm (not including connectors)
• Connector: 68-pin VHDCI female x 2
• Operating temperature: 0 to 55˚C
• Storage temperature: -20 to 70˚C
• Humidity: 5 to 95 %, non-condensing
• Power requirements: +5 V 1.3 A typical

Software Support

• Operating Systems


• Windows 7/Vista/XP/2000/2003 Server
• Linux


• Recommended Software


• AD-Logger
• VB.NET/VC.NET/VB/VC++/BCB/Delphi
• DAQBench


• Driver Support


• DAQPilot for Windows
• DAQPilot for LabVIEW
• DAQ-MTLB for MATLAB
• D2K-DASK for Windows
• D2K-DASK/X for Linux

Ordering Information

• DAQ-2204 - 32/64 x 12-bits 3 MS/s Multi-Function DAQ Card

Accessories

• Terminal Boards


• DIN-68S-01 - Terminal Board with One 68-pin SCSI-II Connector and DIN-Rail Mounting (cables are not included)


• Cables


• ACL-10568-1 - 68-Pin SCSI-VHDCI cable


• SSI Bus Cables (for multiple cards synchronization)


• ACL-SSI-2 - SSI Bus cable for 2 devices


• ACL-SSI-3 - SSI Bus cable for 3 devices


• ACL-SSI-4 - SSI Bus cable for 4 devices