Features
- 32-bit PCI bus, Rev. 2.2, 33 MHz
- Card index switch selection
- Four 32-bit quadrature encoder input and trigger output channels
- Encoder input interface: OUT/DIR, CW/CCW, and 1x, 2x, 4x A/B phase
- Trigger output up to 5 MHz
- Encoder input up to 20 MHz
- Programmable trigger pulse width: 0.2 us to 6.5 ms
- Input/Output circuit source can be selectable: TTL/Open collector (with isolation)
- Switch setting for trigger output default level while power on
- Trigger output pin logic programmable
- Digital filter for individual encoder input channel
- Internal high-speed FIFO for four 32-bit comparators as data reload buffer
- Each channel can store 1,023 points (32-bit)
- Each trigger output channel is selected from all comparators, and manual trigger commands
- Each encoder counter source is selected from comparators and manual trigger commands
- Trigger Pulse Counter
- 14 comparators can select one of 4 trigger output channels individually
- 4 comparators for comparing encoder counter and FIFO data
- 10 comparators for comparing encoder counter and linear data
- 4 channel TTL output pins for general purpose output or trigger output
- 4 channel TTL input pins for general purpose or timer start signal
- 4 channel high speed latch input pins for counters
- EZ and Latch input pins can be used for general purpose input
- Encoder counter clear via EZ input pin as zero operation by rising or falling edge
- Programmable interrupt sources from linear data finished, triggered, FIFO empty/full/low, latched, and TTL input on
- Counter
- Number of Channels 4-CH
- Trigger Pulse Frequency 5 MHz (max.)
- Encoder Counter 4, 32-bit
- Comparator 14, 32-bit
- FIFO Capacity 1,023 points/channel
- Encoder Input Frequency 20 MHz (max.) @ 4 x AB mode
- Trigger Pulse Width 0.2 us to 6.55 ms
- I/O Signals
- Partial I/O Signals Optically isolated with 2500 VRMS isolation voltage
- Partial I/O Signals TTL type
- Encoder Signals Input Pins EA and EB
- Encoder Index Signal Input Pin EZ
- Position latch Input Pin LTC
- Trigger Pulse Output Pin TRG, 5 V pulse output reference to ground
- General Specifications
- Connectors: 50-pin SCSI-type connector
- Operating Temperature: 0 ~ +50˚C
- Storage Temperature: -20 ~ +80˚C
- Humidity: 5 ~ 85%, non-condensing
- Power Consumption
- Slot Power Supply (input: 900 mA (Max.) ±5%, 900 mA (Max.)
- External Power Supply (output) +5 VDC ±5%, 500 mA (Max.)
- Windows Platform
- Available for Windows 7/Vista (32-bit)/XP/2000
- Recommended programming environments: VB/VC++/BCB/Delphi
- TriggerMaster
- The PCI-8124-C is currently available and supports Microsoft Windows XP and Microsoft Windows Vista (32-bit) operating system. An easy-to-use graphic user interface – “TRIGGER MASTER” was also provided to accelerate the developing time for AOI application. This utility is Windows-based application development software which is available to configure and observe the current compared point and trigger pulse output information. Also this utility can setup several mapping method that is able to link the PWM that support adjusting the trigger pulse width and pulse logic.
- PCI-8124-C - Advanced 4-CH encoder card with high-speed triggering function
- Terminal Board
- DIN-50S-01 - Terminal board with one 50-pin SCSI-II connector and DIN-rail mounting
- Cabling
- ACL-10250-1 - 50-pin SCSI-II cable (mating with AMP-787082-5), 1 M
Jeśli potrzebujesz dodatkowych informacji zadzwoń do nas (22 831 10 42) lub napisz wiadomość.
Podobne produkty
Gwarancja 24 miesiące - Gwarancja udzielana przez sprzedawcę na okres 24 miesięcy.
Gwarancja standardowa 24 miesiące
Opinie użytkowników