Features
- 32-bit PCI bus, Rev. 2.2, 33 MHz
- On-board 250 MHz DSP
- 6 axes of ±10 volts analog command for controlling servo motors by differential command signal
- Maximum servo update rate is less than 300 μs for 6 axes
- Encoder feedback frequency up to 20 MHz
- Digital filter for encoder input to reduce noise disturbance
- 2 channel up to 1 MHz high speed trigger pulse output
- A/D inputs (6 channels, 14-bit, ±10 V)
- Manual pulse generator interface
- One dedicated emergency input pin
- High speed position latch function via ORG and Index signals
- On-board 512 kb flash ROM for motion kernel and non-volatile data – PID parameters
- Programmable interrupt source control to host PC
- General purpose I/O: 8 DI + 8 DO
- Watch dog timer for safety control
- Support for up to 16 cards in one system
- Motion Functions:
- Jogging mode
- Any 2-4 axes linear interpolation
- Any 2 axes circular interpolation
- Multi-axis synchronized motion
- Trapezoidal, S-curve velocity profile
- Position override & speed override in anytime
- Programmable acceleration/deceleration
- Variety of homing modes via signals
- Linear and FIFO position comparison method for high speed trigger output
- Filter: 2nd order Notch filter and 1 order low pass filter
- Blend motion (LookAhead)
- E-gear (Electronic gear)
- Contouring function by point table description
- Gantry mode
- Ring counter (32-bit) for rotatory encoder input
- Motion trajectory & PID parameters can be changed on-the-fly
- Analog Input/Output Channels
- Number of Channels: 6
- Analog Output: ±10 Volt with 16-bit D/A Converter
- Analog Input: ±10 Volt with 14-bit A/D Converter
- Encoder Input Channels
- Number of Channels: 6
- Max. Encoder Input Frequency: 20 MHz under 4 x AB mode
- Encoder Counter: 6-CH, 32-bit
- Pulse Command Type: AB phase and CW/CCW modes
- Trigger Channels
- Number of High speed Channels: 2
- Number of Low Speed Channels: 2
- Maximum Trigger Pulse Frequency:
1 MHz for high speed trigger;
25 KHz for low speed trigger - Trigger Pulse Width: 0.3 μs to 300 ms
- Motion I/O Interface Signals
- I/O Pins: Differential and 2500 VRMS, optically isolated
- Incremental Encoder Signals Input Pin: EA and EB
- Encoder Index Signal Input: EZ
- Mechanical Limit Switch Signal Input Pins: ±EL and ORG
- Servomotor Interface I/O Pin: INP, ALM, ERC, SVON, RDY
- Position Compare Output Pin: CMP
- General Purpose I/O
- Digital Input: 8-CH isolated digital input
- Input Voltage: 0 ~ +24 V
- Input Resistance: 2.4 KΩ @ 0.5 W
- Digital Output: 8-CH isolated digital output
- Output Voltage: 5 V (min.); 35 V (max.)
- Output Type: NPN open collector Darlington transistors
- Current Sink: 90 mA
- Analog Input (A/D)
- Resolution: 14-bit
- Input Channel: 4 single-ended
- Input Range: ±10 V, bipolar
- Conversion Time: 8 μs
- Sampling Rate: 110 K samples/sec (Max.)
- Accuracy: 0.01% of FSR, ±1 LSB
- General Specifications
- Connectors: 68-pin SCSI-type connector
- Operating Temperature: 0 ~ +55˚C
- Storage Temperature: +20 ~ +80˚C
- Humidity: 5% to 95%, non-condensing
- Windows Platform
- Available for Windows 7/Vista (32-bit)/XP/2000
- Recommended programming environments: Visual Basic, Visual C++, Borland C++ Builder, and Delphi
- MotionCreatorPro 2
- MotionCreatorPro 2 is a Windows-based application development software package included with the PCI-8253/PCI-8256. MotionCreatorPro 2 is useful for debugging a motion control system during the design phase of a project. Anon-screen display lists all installed axes information and I/O signal status of the PCI-8253/PCI-8256. By using this utility, you can easy tune the axis parameter servo gain (PID plus feed forward gain) reducing the efforts on gain tuning. Furthermore, the sampling windows makes more accurate in motion data analysis, moreover, integrates with axis parameter and PID gain on-the-fly change, thus, the PCI-8253/PCI-8256 provides precise positioning control with less effort.
- PCI-8256 - DSP-based 6-axis analog motion control card
- Terminal Board
- DIN-825-J3A0 - Terminal board for Mitsubishi MR-J3S-A servo amplifiers
- DIN-68S-01 - Terminal board with 68-pin SCSI-II connector with DIN socket
- Cabling
- ACL-10568-1 - 68-pin SCSI-VHDCI cable (mating with AMP-787082-7), 1 M
Jeśli potrzebujesz dodatkowych informacji zadzwoń do nas (22 831 10 42) lub napisz wiadomość.
Podobne produkty
Gwarancja 24 miesiące - Gwarancja udzielana przez sprzedawcę na okres 24 miesięcy.
Gwarancja standardowa 24 miesiące
Opinie użytkowników